
Chris Kotlowski
Tucker Door & Trim
How Windows Are Made: Glass, Vinyl, PVC, and Wood | Behind The Build at Tucker Door & Trim, Part 2Watch on YouTube (opens in a new tab)
Inside Tucker Door & Trim: A Window Plant Tour
This window plant tour goes inside Tucker Door & Trim, a two-step distributor in Monroe, Georgia, that builds windows and doors. Chris Kotlowski walks Stefanie Couch through the whole process, from cutting the glass to staging for delivery. The video also follows one custom trapezoid window to a job site in Cleveland, Georgia.
Why Watch This One?
Questions a dealer, builder, or manufacturer might ask, and what this video shows about each one.
- Why can’t a dealer pull a window off the shelf?
- There is no standard size. Every Tucker window is built custom per order, so a mistake means a remake that takes weeks.
- Is argon worth it over air between the panes?
- Chris Kotlowski explains argon versus air between two panes, and what a heavier gas actually buys the homeowner.
- How does a plant cut glass with less waste?
- The Billco Glass Cutter yields the most pieces out of a single sheet. Curved radius glass is sometimes still cut freehand by a person.
- What happens when a window is off by a quarter inch?
- It does not show on install day. It can show three winters later, when water is leaking in.
Jump to the Part You Need
Press a line and the video starts there, right on this page.
- 0:00Inside a 290,000 sq ft window plant. Plays on this page
- 0:22Following a custom trapezoid window from production to the job site. Plays on this page
- 1:18How to install a window so it lasts decades. Plays on this page
- 2:09How shop flow works in a window plant. Plays on this page
- 2:50How custom glass sizes get programmed and cut on a Billco Glass Cutter. Plays on this page
- 3:39How a glass optimizer cuts waste. Plays on this page
- 4:04Why curved glass is sometimes cut by hand. Plays on this page
- 4:33How glass is washed and sealed with Duraseal. Plays on this page
- 5:29Insulated glass and why argon matters for windows. Plays on this page
- 6:21How wood window sashes are built by hand at Tucker. Plays on this page
- 7:57How PVC window parts are milled and assembled. Plays on this page
- 8:55The benefits of an automatic glazer in the PVC window process. Plays on this page
- 9:36Watching a vinyl sash get welded together on the Greller S400 Sash Welder. Plays on this page
- 10:18How welded vinyl sashes get cleaned on the Greller Sash Corner Cleaner. Plays on this page
- 11:24Cleaning vinyl sash corner with the GED RoboClean system. Plays on this page
- 12:12Final assembly, labeling of windows, and loading the dock. Plays on this page
- 12:42How big can Tucker make a window?. Plays on this page
More From Behind the Build
Each one has its own page.
A Custom Home Walkthrough Above Lake BurtonChuck Vazquez, CK Builders
Tour Tucker Door & Trim’s Door Production LineJason Gert and Bryan Broadnax, Tucker Door & Trim
Luxury Home Windows and Doors From a 101-Year-Old SupplierWill Lummus and Reid Lummus
Walkable Community Design With Lew OliverLew Oliver and Liz Treadwell
Let Buyers See Your Real Work.
Vendor photos show the product. They can’t show your people, your yard, or your jobs. Our crew comes to your plant, yard, showroom, or jobsite. You get photos and video of the real thing.
A free call with Stefanie Couch. About 30 minutes.
